DIPSE   PS 500   500g x 0,1g

-------- Balancing ------------
1. The balance on a hard and even surface place.
2.  Balance switch on with” ON key”. After few
seconds”0,0” appears in the display.
        Now the balance is ready for use.

        Importantly: Shouldn't the display on”0,0” 
                             Press the “TARA” key

3. Present the balancing property only now centrically. 
4. Is the balancing property heavier than the balancing area, 
        does appear in the display ”ERR” (= overload). 
        Balancing property immediately down-take. 
5. The balancing process is final; the balance switches itself off after 3 minutes. 

        ------------ TARA-Function------------
 
1.      “0,0” switch balance ”ON” Display wait for”0,0”.
2. Tare container (plate, bag...) centrically on
         the weighing surface and” TA RA” key operation 
         those put to display show “0,0”; the weight of the
         tare container is now internally stored.
3. The taring process can be repeated any marks 
(mixing several components), to that max. weighing range .

              ------------ adjusting -------------
1. switch balance “ON” Display wait for “0,0”
2. “Adjusting branch” keep pressed, to ”CAL” appears. ,
        Display branch on ”LOAD 100” 
3. place 100g centrically on the balancing 
surface “ DONE” appears. 
4. The balance is now adjusted.
5. Take the Weight down.

             ----------- Price counting Procedure------------ 

1. switches balance “ON,  “0,0” appears
2. press “$” key once to choose price function ( 3 kinds
of prices available).Choose one of the 3 prices and 
press “    “.Put the good on the platform and the scale
will calculate the price.
3.    press “    “ to return to the normal mode

                                  Store 3 prices
1. switches balance “ON,  “0,0” appears
2. press  the “$” key to enter the price mode.
3. press the “$” key to choose the price which would
like to be re-set.
4. Than press “$” for 3 Sec. to start setting or modifying.
5. press “     “ to move the decimal point.
6. press” $” to choose the  next digit.
7. press “      “ to choose a number 0 to 9.
8. press “       “ to confirm and store the price.
                    

            --------- General notes ----------------- 
1. This device is a precision instrument and by factory correctly adjusted
2.  Open the device (also the attempt) leads to go out to the warranty. 
3. Keep the scale clean. 
4. Avoid it to suspend the device of strong cold weather or heat. 
5.     Avoid strong vibrations. 
6.     Avoid it to exceed the max. indicated weight.